Panasonic KX-TDE200 - Manual (Page 127)

Operation No. Operation
3
To clear the voice message
(Press the AUTO DIAL/STORE button or enter 1 to confirm.)
4 To call back the caller who left the voice message
5 To go back to the previous voice message
# 6
To leave a voice message directly in the message box of another
extension (Enter desired extension number.)
# 8
To play back your greeting message and record a voice message
in your own message box
# 9 To end the call
• In addition to the caller information that is recorded in the Call Log, the following SVM Log
information is recorded with voice messages left by callers:
• Caller’s Name
• Caller’s Telephone Number
• Time recording started
• Voice Message Status
– "New" is displayed for voice messages that have not previously been listened to.
– "Old" is displayed for voice messages that have previously been listened to.
Please note that the information shown on the display may vary depending on the information
that was received and the type of telephone used. Only users of a 6-line display PT can view
all of the above information.
• You can lock the SVM Log display by using an extension PIN (Personal Identification Number)
to prevent other users from viewing the information and from playing back your voice
messages (Display Lock). Refer to "3.1.2 Personal Programming".
• If your telephone has a Message for Another Extension button, you can access the message
box of another extension and listen to voice messages for that extension.
• If a new voice message has been left in your message box, you will hear dial tone 4 after going
off-hook. In addition, if your telephone has a Message button or Message/Ringer Lamp, the
corresponding button or lamp will light when a voice message has been left.
Dial Tone 4
1 s
Document Version 2008-10 Operating Manual 127
1.3.64 SVM (Simplified Voice Message)