Panasonic KX-TDE200 - Manual (Page 25)

(PF)
Programmable Feature
(PF):
Located on the upper part of the
Flexible button array or on the
DSS Console.
Assigns the desired button and
used to access the stored
feature. Mostly used as a
One-touch Dialing button. (Only
the "F and number" may be
shown on some telephones.)
MODE
MODE:
Used to shift the display to access
various features.
SELECT
SELECT:
Used to select the displayed item
or to call the displayed phone
number.
SHIFT
SHIFT:
Used to access the second level of Soft
button features.
ENTER:
Used to confirm the selected
item.
CANCEL:
Used to cancel the selected item.
NEXT PAGE:
Used to switch the page for the
Self Labeling feature.
(KX-NT366 only)
Customized Buttons
If the term is in parentheses like (Account) in this manual, it means a flexible button has been made into an
"Account" button. To customize, refer to "3.1.4 Customizing the Buttons".
Button Feature
Loop-CO (L-CO)
Used to access an idle CO line for making outside calls.
Incoming outside calls from any CO line arrive at this button.
Group-CO (G-CO)
Used to access an idle CO line in a specified CO line group for making
outside calls.
Incoming calls from CO lines in the assigned CO line group arrive at this
button.
Single-CO (S-CO) Used to access a specified CO line for making or receiving outside calls.
Direct Station Selection (DSS)
Used to access an extension with one touch.
It is also possible to be changed to the other feature button.
One-touch Dialing Used to access a desired party or system feature with one touch.
Incoming Call Distribution
Group (ICD Group) Used to access a specified incoming call distribution group for making or
receiving calls.
Message
Used to leave a message waiting indication or call back the party who left
the message waiting indication.
Message for Another
Extension
Used to have a Message button for another extension.
Document Version 2008-10 Operating Manual 25
1.1.1 Before Operating the Telephones