78 wireless xdp parallel mode, Wireless xdp parallel mode – Panasonic KX-TDE200 User Manual

Page 145

Advertising
background image

Whisper OHCA is only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.

Whisper OHCA is not available for outside calls; only call waiting tone can be set (refer
to "1.3.13 Call Waiting Tone").

A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. (

® 1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory Number)

Extension)

For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEATURES".

1.3.78 Wireless XDP Parallel Mode

Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.

To set

PS

Enter extension number
of the paired telephone.

Press CANCEL.

PS

extension no.

Press TALK.

Enter 48.

4

8

1

C.Tone

Enter 1.

To cancel

PS

PS

Press CANCEL.

Press TALK.

Enter 48.

4

8

0

C.Tone

Enter 0.

Some wired telephones are prohibited from using this feature.

If you go off-hook while your paralleled telephone is in use, the call will switch over to you.

Document Version 2008-10

Operating Manual

145

1.3.78 Wireless XDP Parallel Mode

Advertising
This manual is related to the following products: