Panasonic KX-TDE200 - Manual (Page 99)

• For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES".
1.3.42 Message Waiting
For a caller
When the called extension is busy or does not answer your call, you can
leave a notification so that the called party may call you back.
For a called extension
As a message receiver, the Message button light or Message/Ringer
Lamp lets you know that a call has been received. If you receive
notification, you can call back the caller by a simple operation.
Note
This feature is not available for SIP extensions (except the
KX-HGT100). For KX-HGT100 users, refer to the Quick Reference
Guide of the KX-HGT100 for instructions.
For a caller
To leave a message waiting indication
PT/SLT/PS
Press MESSAGE
or enter 4. On-hook.
When the called extension is busy or does not answer
OR
4
MESSAGE
C.Tone
To leave/cancel a message waiting indication
PT and SLT PT/SLT/PS
Off-hook. Enter 1 to leave
or 0 to cancel. On-hook. Enter desired
extension number.
Leave
Cancel
1
0
OR 0 7
Enter 70.
desired
extension no.
C.Tone
• When making a call to SIP Extensions, you cannot leave a message waiting notification. If you
perform the operation to leave a message waiting notification to a SIP Extension, you will hear
a reorder tone.
For a called extension
Document Version 2008-10 Operating Manual 99
1.3.42 Message Waiting