Printek FieldPro RT43 - Manual (Page 26)

Printer Configuration
WLAN Auth
Possible Values: Auto*, Open, Shared
This feature specifies the authentication method that will be used when establishing connections on the network.
The method may be to use an open key or a shared key. If set to “Auto”, the printer will automatically match
itself to the method used by other nodes.
IP Address Assign
Possible Values: DHCP*, Static
This features specifies whether the printer will obtain an IP address from a DHCP server, or if a an IP address
will be manually assigned.
IP Address
Possible Values: 0.0.0.0*, User specified
This feature specifies the IP address for the printer.
Note that this feature has no effect if IP Address Method is not set to “Static”.
IP Subnet Mask
Possible Values: 0.0.0.0*, User specified
This feature specifies the range of addresses, or the size of the network, that the printer’s IP address belongs to.
Note that this feature has no effect if IP Address Method is not set to “Static”.
IP Gateway
Possible Values: 0.0.0.0*, User specified
This feature specifies the network node where data destined for a node outside of the LAN should be directed.
Note that this feature has no effect if IP Address Method is not set to “Static”.
Tunnel Port Number
Possible Values: 00000 … 08023* … 65384
This feature specifies the TCP/IP port to be used for data that is to be printed..
20