Panasonic KX-F1000AL - Manual (Page 19)

4. Transmitting and Receiving Fax Calls
4
19
1 Insert the documents FACE DOWN.
2 Dial a phone number.
¡ If you misdial, press (STOP) and dial again.
3 Press (START/SET) .
¡ The unit will start to dial and transmit the
documents.
Note:
If there is no answer or the line is busy, the unit will
automatically redial the number up to 2 times.
To cancel redialing, press
(STOP) .
Transmitting documents with fewer procedure
Documents you can send
Note:
¡ Remove clips, staples or other similar fastening objects from a document.
¡ Check that ink, paste or correction fluid on the documents have completely dried.
¡ Do not feed the following types of documents into the unit. Make copies of these documents by using a
copier then use these copies for fax transmission.
—Paper with a chemically treated surface such as carbon paper or carbonless duplicating paper
—Electrostatically charged paper
—Heavily curled, creased or torn paper
—Paper with a coated surface
—Paper with faint contrast between the printing and the background
—Paper with printing on the reverse side that can be seen through the front (e.g. newspaper)
128 mm
(5 w )
128 mm
(5
w
)
216 mm (8 1 ⁄
2
w )
600 mm
(23
5
⁄ 8
w
)
Paper width
216 mm (8 1 ⁄
2
w )
208 mm (8 3 ⁄
16
w )
4 mm
Scanned
area
Minimum size Maximum size Effective scanning area Document weight
Single sheet:
45 to 90 g/m 2 (12 to 24 lb.)
Multiple sheets:
60 to 75 g/m 2 (16 to 20 lb.)
(STOP)
FACE DOWN
(START/SET)
To send 16 or more sheets at a time
Insert the first 15 sheets of the documents. Add the extra sheets up to 15 before the last sheet is fed into the
unit.
Dial keypad