Panasonic KX-F1000AL - Manual (Page 60)

60
8. Advanced Operations (KX-F1100AL only)
Re-recording a greeting message
You can change the content of the ANS/FAX mode
greeting message and mailbox greeting message
from a remote location.
1 Call your unit.
2 For the ANS/FAX mode greeting message:
Press your remote ANS ID.
For the mailbox greeting message:
Press
J
and
A
,
B
or
C
(desired
mailbox no.). Then press the mailbox
password.
3 Press
G
to start recording.
¡ A long beep will sound.
4 Speak immediately after the long beep (up to
16 seconds).
¡ If you pause for over 2 seconds while
recording, the unit will beep and stop the
greeting message recording. Repeat from
step 2 within 10 seconds.
5 When finished, press
I
.
¡ The new greeting message will be played.
Turning on/off pager alert
You can remotely turn on/off the pager alert for
incoming message if it has been programmed with
a pager number in advance (see page 61).
1 Call your unit.
2 For the common pager alert;
Press the remote ANS ID.
For a mailbox pager alert;
Press
J
and the mailbox number (
A
,
B
or
C
), then press the mailbox password.
3 To turn on the pager alert, press
HA
.
To turn off the pager alert, press
HB
.
To skip the greeting message
Callers can record their messages without listening
to the greeting message.
After calling your unit, dial
@
during the greeting
message playback.
¡ The unit will skip the rest of the greeting message
and start recording.