Panasonic KX-F1000AL - Manual (Page 53)

53
8
8. Advanced Operations (KX-F1100AL only)
Programming the mailbox password
In order to leave a message in a mailbox, each owner of a mailbox must inform their callers of their mailbox
number in advance and set the unit to the ANS/FAX mode.
1 A caller calls your unit (from a touch tone telephone only).
¡ The ANS/FAX mode greeting message will play.
2 They press * , then the desired mailbox number (1–3).
¡ Personal greeting message will play, followed by a long beep.
3 They leave a message in the mailbox.
Note:
If a caller does not specify a mailbox in step 2, the message will be recorded into common memory.
Program your own password for your mailbox to prevent other users from retrieving messages.
Choose any 3-digit number except a number using digits 0 or 7.
Important:
The mailbox password must be different from the first 2 digits of a remote ANS ID (page 57), a junk mail
prohibitor ID (page 43) and a remote fax activation code (page 42).
1 Press (MENU) .
2 For mailbox 1, press K , then E A .
For mailbox 2, press K , then E B .
For mailbox 3, press K , then E C .
3 Press (START/SET) .
4 Enter the new password.
5 Press (START/SET) .
¡ To program other passwords, repeat from
step 2.
6 Press (MENU) .
NO.=
BOX3 PASSWORD
BOX2 PASSWORD
BOX1 PASSWORD
SYSTEM SET UP
How incoming messages are recorded in a mailbox
(MENU)
(START/SET) Dial keypad