Panasonic KX-F1000AL - Manual (Page 12)

2. Initial Preparation
Setting the date and time
12
1 Press (MENU) .
2 Press K , then @ A .
3 Press (START/SET) .
4 Enter the correct month/day/year/hour/minute
by selecting each 2 digits.
Then press
j for AM or press k for PM.
Example: Aug. 10 1996, 3:00PM
Press `h a` iF `c `` ,
then press k for PM.
5 Press (START/SET) .
6 Press (MENU) .
SET DATE & TIME
SYSTEM SET UP
Note:
¡ When you make a mistake while programming,
press
(STOP) then make the corrections.
¡ The accuracy of the clock will be approximately
t 60 seconds a month.
1 Press (MENU) .
2 Press K , then @ B .
3 Press (START/SET) .
4 Enter your logo up to 30 characters.
(The preset logo will be cleared.)
¡ Refer to the instructions on page 13.
5 Press (START/SET) .
6 Press (MENU) .
LOGO=
YOUR LOGO
SYSTEM SET UP
Usually the logo is a company, division or personal name in an abbreviated form.
Before using your unit, program the following:
¡ Current date and time
¡ Your logo
¡ Your facsimile telephone number
This information will be printed on the top of each page transmitted from your unit.
(MENU)
(START/SET)
Dial keypad
(STOP)
Setting your logo
(MENU)
(START/SET) Dial keypad