Setting your facsimile telephone number, Adjusting volumes – Panasonic KX-F1000AL User Manual
Page 14
2. Initial Preparation
Setting your facsimile telephone number
14
1
Press
(MENU)
.
2
Press
K
, then
@ C
.
3
Press
(START/SET)
.
4
Enter your facsimile telephone number up to
20 digits.
¡k
button inserts a space and
j
button a
“+”.
5
Press
(START/SET)
.
6
Press
(MENU)
.
NO.=
YOUR TEL NO.
SYSTEM SET UP
»
Ringer volume: 3 levels (high/low/off) are available.
Press
(VOLUME)
(
Z
/
Y
) while the unit is in an idle status.
To turn the ringer off:
1. Press
Z
repeatedly.
¡
The following messages will be shown alternately.
»
2. Press
(START/SET)
.
»
While the ringer volume is set to off:
The display will show the following message and the unit will
not ring when receiving a call.
»
Handset volume: 3 levels (high/middle/low) are available.
Press
(VOLUME)
(
Z
/
Y
) when using the handset.
»
Speaker volume: 8 levels (high to low) are available.
Press
(VOLUME)
(
Z
/
Y
) when using the speakerphone.
»
Answering device volume (KX-F1100AL only):
9 levels (high to off) are available.
Press
(VOLUME)
(
Z
/
Y
) when listening to the recorded
messages.
RINGER OFF
YES: PRESS SET
RINGER OFF= OK?
Note:
Logo, telephone number, date, time and page
number will be printed outside of the document you
send. To change the print position, see page 45.
Adjusting volumes
(START/SET)
(MENU)
(START/SET)
Dial keypad
(VOLUME)