Panasonic KX-F1000AL - Manual (Page 27)

27
4
4. Transmitting and Receiving Fax Calls
1 Press (MENU) .
2 Press K , then press @H .
3 Press (START/SET) .
4 Press (‹) or (›) to select the desired
number of rings.
5 Press (START/SET) .
6 Press (MENU) .
COUNT=2 [ ÿŸ ]
ANS/FAX RING
SYSTEM SET UP
TOLL SAVER:
When you call the unit from a remote location, the number of rings will tell you if there are any new voice
messages or not.
If the unit answers on the second ring, there is at least one newly recorded message.
If the unit answers on the fourth ring, there are no newly recorded messages.
Hang up immediately when you hear the third ring. This will save you the toll charge for the call.
RINGER OFF:
The unit will answer without ring.
(MENU)
(‹) / (›) (START/SET) Dial keypad
Receiving in the ANS/FAX mode (KX-F1100AL only)
When a call comes in, the unit will automatically answer the call and distinguish between a fax and voice call.
When a fax call is received, the unit will automatically activate the fax function to receive documents.
When a voice call is received, the unit will play the greeting message and record an incoming voice message.
Setting the ANS/FAX mode ring count
You can choose from 2 to 9, TOLL SAVER and RINGER OFF.