Panasonic KX-F1000AL - Manual (Page 43)

8. Advanced Operations
Junk mail prohibitor
8
43
This feature prevents reception from facsimile machines whose phone numbers are not stored in automatic
dialing.
Important:
¡ This feature does not work under the following conditions:
—when the unit is in the TEL mode,
—when manual reception is performed, or
—the other party does not program their facsimile ID number correctly.
¡ If you wish to receive documents from unauthorized machines, inform your junk mail prohibitor ID to callers,
and ask them to transmit documents manually.
¡ The junk mail prohibitor ID must be different from the first 2 digits of a remote ANS ID (page 57), a mailbox
password (page 53), a remote TAM activation ID (page 25) and a remote fax activation code (page 42).
1 Press (MENU) .
2 Press K , then BD .
3 Press (START/SET) .
4 Press (‹) or (›) to select “ON”.
¡ If this feature is not required, select “OFF”.
5 Press (START/SET) .
6 To change the junk mail prohibitor ID, enter
the desired 2-digit number.
¡ 0, # and * cannot be used.
7 Press (START/SET) .
8 Press (MENU) .
ID=22
MODE=ON [ ÿŸ ]
MODE=OFF [ ÿŸ ]
JUNK MAIL PROH.
SYSTEM SET UP
Even if the junk mail prohibitor feature is activated, a designated caller will be able to transmit documents.
Give your junk mail prohibitor ID to all your designated callers, and advise them of the following steps.
This operation is available when your unit is in the TEL/FAX, EXT. TAM or ANS/FAX mode.
1. Call your unit from a touch tone telephone.
2. Listen for the different ring back tone or greeting message.
3. Dial the prohibitor ID.
4. Listen for the fax tone, and start transmission.
Setting the junk mail prohibitor
Transmitting documents to your unit with the prohibitor ID
(MENU)
(‹) / (›) (START/SET) Dial keypad