Panasonic KX-F1000AL - Manual (Page 5)

5
1
1. Installation and Connection
1 Open the paper cassette cover.
¡ When removing the paper cassette from the
unit, lift it up slightly (
A ) and pull it towards
you ( B ).
2 Fan the stack of paper to avoid a paper jam.
3 Insert the paper by aligning the paper edges
with the partition.
¡ Most paper has instructions recommending
the side to print on. Insert the paper with the
print side down.
¡ The height of the paper should not exceed
the limit mark on the paper cassette or it
may cause a paper jam.
4 Push down the opposite edges so they are
secured under the clips.
You can use A4 size paper. The paper cassette can hold up to 250 sheets of 75 g/m 2 (20 lb.) paper. Use 60 to
90 g/m 2 (16 to 24 lb.) paper.
PULL UP
PULL UP
UPPER LIMIT
Limit mark
Paper cassette
cover
Partition
Clip
A
B
Correct Incorrect
Installing the paper cassette
5 Close the paper cassette cover and insert the
paper cassette into the unit until it clicks into
place.
Note:
¡ Do not insert paper of different thickness into the cassette at same time. This may cause a paper jam.
¡ Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or
wrinkled, or paper with a cotton and/or fiber content that is over 20%.
¡ Avoid used paper for double-sided printing.
¡ Do not use paper printed with this unit for double-sided printing with other copiers or printers, or a paper
jam may occur.