Pager alert for incoming messages, Kx-f1100al only) – Panasonic KX-F1000AL User Manual
Page 61
61
8
8. Advanced Operations (KX-F1100AL only)
Pager alert for incoming messages
(KX-F1100AL only)
1
Press
(MENU)
.
2
For common pager alert, press
K
, then
F@
.
For mailbox 1 pager alert, press
K
, then
FA
.
For mailbox 2 pager alert, press
K
, then
FB
.
For mailbox 3 pager alert, press
K
, then
FC
.
3
Press
(START/SET)
.
4
Press
(‹)
or
(›)
to select “ON”.
¡
If this feature is not required, select “OFF”.
5
Press
(START/SET)
.
6
Enter your pager phone number.
If necessary, press
(PAUSE)
4 times.
Contact your pager company regarding the
proper pause time.
7
If your pager has the ability to display phone
numbers, enter the number that you wish to
appear on the display.
Press
K
after entering the phone number.
8
Press
(START/SET)
.
9
Press
(MENU)
.
NO.=
MODE=ON [
ÿŸ
]
MODE=OFF [
ÿŸ
]
MAIL BOX3 PAGER
MAIL BOX2 PAGER
MAIL BOX1 PAGER
COMMON PAGER
SYSTEM SET UP
This feature allows your unit to call your pager automatically each time an incoming message is recorded.
You can set the pager number for each memory (common, mailbox 1, 2 and 3).
This feature will be only effective for automatic pager.
(MENU)
(‹)
/
(›)
(START/SET)
Dial keypad
(PAUSE)
Note:
¡
You may enter a total of 30 digits and/or pauses
in steps 6 and 7.
¡
This feature can be turned on/off remotely from a
touch tone phone (see page 60).
¡
When the pager beeps, call your unit from a
touch tone telephone to retrieve the message.