Porter-Cable AZ1203 - Manual (Page 11)

CD PLAYER
11
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
A maximum of 20 tracks can be stored in the memory.
1 Select the desired track with SEARCH ∞ or §.
2 As soon as the number of the desired track is displayed, press
the PROGRAM button to store the track in the memory.
™
PROGRAM
appears in the display and the number of the
stored track is shown. Then Prog lights up briefly.
3 Select and store all desired tracks in this way.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
™ The display shows all stored track numbers in sequence.
If you try to store more than 20 tracks the display shows FULL.
If you press PROGRAM and there is no track selected, the display
shows no SEL.
If you have selected the tracks in the stop position, press
PLAY·PAUSE 2;.
If you have selected the tracks during CD play, first press STOP 9,
then press PLAY·PAUSE 2;.
From the stop position, press STOP 9.
™ no Prog lights up briefly,
PROGRAM
disappears and your
program is erased.
Note: The program will also be erased if you
– interrupt the power supply,
– open the CD compartment, or
– move the
POWER slider to TUNER or TAPE .
CD
Erasing the program when CD playback is stopped
PROGRAM
CD
Playing the program
CD
PROGRAM
CD
PROGRAM
CD
STOP
AY
SE
REP E
SHUFFLE
PRESET
SEARCH
PROG
BAND
Programming track numbers
English