Porter-Cable AZ1203 - Manual (Page 13)

CASSETTE RECORDER
13
1 Set the POWER slider to CD.
2 Insert a CD and, if desired, program track numbers.
3 Press STOP·OPEN 9/ to open the cassette compartment.
4 Insert a blank, unprotected cassette and close the cassette
compartment.
5 Press RECORD 0 to start recording.
™ Playing of the CD or program starts automatically. It is not
necessary to start the CD player separately.
6 For brief interruptions press PAUSE ;. Press the PAUSE ; key
again to resume recording.
7 To stop recording, press STOP·OPEN 9/.
Note: the recording can be started from different positions:
– if the CD player is in pause mode, recording will start
from this very position (use SEARCH ∞ or § );
– if the CD player is in stop mode, recording will start from
the beginning of the CD or program.
1 Set the POWER slider to TUNER.
2 Tune to the desired radio station (see chapter ”RADIO”).
3 Press STOP·OPEN 9/ to open the cassette compartment.
4 Insert a blank, unprotected cassette and close the cassette
compartment.
5 Press RECORD 0 to start recording.
6 For brief interruptions press PAUSE ;. To resume recording press
the PAUSE ; key again.
7 To stop recording, press STOP·OPEN 9/.
Recording from the radio
PAUSE
SEARCH
PLAY
RECORD
CD SYNC
HRO STA
RT RECO
RDING
OPEN
STOP OPEN
Recording from the CD player – CD synchro start
English