Planar PDP 60B - Manual (Page 17)

Connecting cable broadcasting receiver
How to watch cable broadcasting
1. Turn on the PDP monitor and press input selection button of remote control.
2. Use button to select external input or S-video (When it is connected to S-video terminal) and
then press but ton. (When selecting S-video, voice should be connected to S-video voice terminal.)
3. Turn on cable TV receiver and then select the channel you want.
In order to watch cable TV, subscribe to local cable TV broadcasting
company and install separate converter for cable TV.
Connecting to external input terminal
Connect image/voice connection line to PDP external input terminal [(yellow
is for image, white is for voice (left), red is for voice (right)) and image/voice
output terminal of converter for cable TV.
Connecting to S-Video terminal
(Use S-video connection line for better image.)
Connect S-video connection line to PDP S-video terminal and S-video ter-
minal of converter for cable TV.
Connect voice connection line to PDP S-video voice input terminal and
voice output terminal of the converter for cable TV.
<cable broadcasting receiver >