Planar PDP 60B - Manual (Page 2)

Safety Precautions
Power Supply - W a r n i n g
Power Supply - Caution
Do not use damaged electrical
cord/plug, or loose outlet.
It can cause an electric shock or a fire.
Do not use multiple devices in an
outlet at the same time to avoid the
overload.
It may cause a fire due to over heating
from the outlet.
Fully insert the plug into the
outlet
If the connection is unstable, it
may cause a fire.
AC plug should not be touched
with wet hands. It may cause
an electrical shock.
It can cause an electrical shock.
Be sure to ground the PDP power
source.
It may cause an electrical shock if it has
a failure or electrical leakage. Only use
the proper power cord supplied with
PDP and connect it to an outlet with a
ground terminal.
Be careful not to forcibly bend the
electrical cords or press them with
a heavy object.
It may cause an electrical shock or a
fire.
Wh en un plug ging the AC
cord, pull out by holding the
plug itself and not by pulling
on the cord.
If the power cord is damaged. it
may cause a fire.
Power Supply - W a r n i n g
This manual describes how to operate
the PDP properly and safely. Please
read this manual carefully. This manual
should be retained for future reference.