Planar PDP 60B - Manual (Page 50)

Problem Action
Remote control does not work. 1. Check if main power button of PDP monitor is
pressed.
2. Check if the batteries of the remote control were loaded
properly.
3. Check if any obstacle exists between the monitor and
the remote control and remove it, if any.
4. If the batteries have no power, replace them with two
new batteries.
PDP monitor makes strange sounds. It is the sound when the appearance contracts or expands
due to changes of environment such as humidity, temper-
ature, etc. It is not a failure.
PDP monitor indication lamp is On. It takes about 3~5 sec for the indication lamp to be turned
off.
• Others
Trouble Shooting
Supporting Display Mode