Planar PDP 60B User Manual
Page 49
Problem
Action
Screen appears,
1. Press the button gently.
but there is no sound
2. Increase the sound by pressing volume adjustment
button.
3. Check if voice terminal of external input is connected
properly.
4. Check if speaker line is inserted properly.
5. If it is PIP mode,
convert voice of main
screen and sub-screen by pressing S/SWAP button.
6. Select and check the other input.
If the sound still does not work and the other channels are
the same after you have done as the above, contact the an
authorized service center.
Lots of noise (static) occurs.
When connecting SET TOP BOX, check if it is on stereo
broadcasting. If it is, the broadcasting state may not be
available in the location where TV does not come out or
away from the station. Therefore, select "Mono". Please
refer to page 39.
• Sound related Matters