Panasonic KX-TG2431. - Manual (Page 32)

Intercom Features
32 For assistance, please call 1-800-211-PANA (7262).
Transferring a call (KX-
TG2432 only)
Outside calls can be transferred from one
handset to the other.
1
During an outside call, press
{
INTERCOM}.
L The call will be put on hold.
2
To page the other handset, press
{
handset[1]} or {handset[2]}.
3
Wait for the paged party to answer.
L
The paged handset user can answer
by pressing {C}, {s}, or
{
INTERCOM}.
L
If there is no answer, press {C} or
{s}
to return to the outside call.
4
To complete the transfer, press {OFF}.
Transferring a call without speaking to
the paged party
1
During an outside call, press
{
INTERCOM}, then press
{
handset[1]} or {handset[2]}.
2
Press {OFF}.
L The outside call rings at the other
handset.
Note:
L If the paged party does not answer the
call, press {C} or {s} to return to the
call. If not answered within 1 minute, the
call will ring at your handset again. If you
still do not answer the call within 4
minutes, the call will be disconnected.
Conference calls (KX-
TG2432 only)
A conference call allows 2 handsets to
speak together with an outside party.
1
During an outside call, press
{
INTERCOM}.
L The call will be put on hold.
2
To page the other handset, press
{
handset[1]} or {handset[2]}.
3
When the paged party answers, press
{
Conf} on your handset to establish a
conference call.
L
“Conference” will be displayed.
L
To leave the conference, press
{
OFF}. The other 2 parties can
continue the conversation.
Note:
L
The outside call can be put on hold by
pressing {HOLD} during a conference
call. Communications between
extensions are not suspended. Only the
person who placed the call on hold can
resume the conference by pressing
{
Conf}.
TG2431_2432(e).book Page 32 Thursday, February 3, 2005 5:01 PM