Panasonic KX-TG2431. - Manual (Page 35)

Programmable Settings
For assistance, please call 1-800-211-PANA (7262). 35
Handset ringer tone
You can change the ringer tone heard
when an outside call is received. There are
3 tones and 4 melodies. The default
setting is “Tone 1”.
1
Press {MENU}.
2
Scroll to “Ringer setting” by
pressing {V} or {^}, then press {
>}.
3
Scroll to “Ringer tone” by pressing
{V}
or {^}, then press { >}.
4
Press {V} or {^} repeatedly to select
the desired setting.
L
You can also select the ringer tone by
pressing {1} to {7}.
L
If the ringer volume has been turned
off, the handset will not ring.
5
Press {Save}, then press {OFF}.
Note:
L
If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (Tone 1 to 3). If you select a
melody, you will not be able to
distinguish lines by their ringers.
L If you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
Handset interrupt tone
This tone lets you know when you receive
a call while you are on an intercom call
(page 30).
“2” (default): The tone will sound 2 times.
“On”: The tone will sound for as long as the
line rings.
“Off”: Turns this feature off.
1
Press {MENU}.
2
Scroll to “Ringer setting” by
pressing {V} or {^}, then press {
>}.
3
Scroll to “Interrupt tone” by
pressing {V} or {^}, then press {
>}.
4
Press {V} or {^} repeatedly to select
the desired setting.
5
Press {Save}, then press {OFF}.
Ringer setting
Ringer tone
Ringer tone
1=Tone 1
KBack dB SaveL
TG2431_2432(e).book Page 35 Thursday, February 3, 2005 5:01 PM