Display options, Telephone settings – Panasonic KX-TG2431. User Manual

Page 37

Advertising
background image

Programmable Settings

For assistance, please call 1-800-211-PANA (7262).

37

Display options

Handset LCD contrast

You can adjust the handset display
contrast. There are 6 levels. The default
setting is level 3.

1

Press {MENU}.

2

Scroll to “Initial setting” by
pressing {V} or {^}, then press {

>}.

3

Scroll to “LCD contrast” by pressing
{V}

or {^}, then press {

>}.

4

Press {V} or {^} repeatedly to select
the desired setting.

5

Press {Save}, then press {OFF}.

Display language

You can select either “English” (default)
or “Español” as the display language.

1

Press {MENU}.

2

Scroll to “Initial setting” by
pressing {V} or {^}, then press {

>}.

3

Scroll to “Change language” by
pressing {V} or {^}, then press {

>}.

4

Press {V} or {^} repeatedly to select
the desired language.

L

You can also select by pressing
{

English} or {Español}.

5

Press {Save} or {Salvar}, then press
{

OFF}.

Note:

L

If you select a language you cannot
read, press {MENU} {0} {8} {1} {Save}
to change the display language to
English.

Telephone settings

Dialing mode

If you cannot make calls, change this
setting depending on your telephone line
service.
Tone” (default): For tone dial service.
Pulse”: For rotary pulse dial service.

1

Press {MENU}.

2

Scroll to “Initial setting” by
pressing {V} or {^}, then press {

>}.

3

Scroll to “Set tel line” by pressing
{V}

or {^}, then press {

>}.

4

Scroll to “Set dial mode” by pressing
{V}

or {^}, then press {

>}.

5

Press {V} or {^} repeatedly to select
the desired setting.

6

Press {Save}, then press {OFF}.

Flash time

The flash time depends on your telephone
exchange or host PBX.
You can select: “90ms” (milliseconds),
100ms”, “110ms”, “250ms”, “300ms”,
400ms”, “600ms”, or “700ms” (default).

1

Press {MENU}.

2

Scroll to “Initial setting” by
pressing {V} or {^}, then press {

>}.

3

Scroll to “Set tel line” by pressing
{V}

or {^}, then press {

>}.

4

Scroll to “Set flash time” by
pressing {V} or {^}, then press {

>}.

5

Press {V} or {^} repeatedly to select
the desired setting.

6

Press {Save}, then press {OFF}.

TG2431_2432(e).book Page 37 Thursday, February 3, 2005 5:01 PM

Advertising