Proxima ASA Proxima PROAV9350 - Manual (Page 21)

21
MENU BAR
SYSTEM MENU
Used to select a
computer system.
(Refer to P28)
IMAGE MENU
Used to adjust the
computer image.
[Fine sync / Total dots /
White Balance / Contrast /
Brightness / Sharpness/
Gamma/Progressive]
(Refer to P32)
PC ADJUST MENU
Used to adjust the
parameters to
match with the input
signal format.
(Refer to P30, 31)
SETTING MENU
SCREEN MENU
Used to adjust the
size of the image or
to correct the
Keystone distortion.
(Refer to P34)
LANGUAGE MENU
Used to select
the language
used in the
Menu.
(Refer to P41)
SOUND MENU
Used to adjust the
sound [Volume,
Bass or Treble], to
select Built-in SP
On-Off and Sound
Mute.
(Refer to P26)
BEFORE OPERATION
POSITION MENU
Used to adjust the
position of the
image.
(Refer to P33)
MENU BAR IN COMPUTER MODE
WHEN SELECT THE HDB 15-PIN TERMINAL
WHEN SELECT THE DVI TERMINAL
WHEN SELECT THE 5 BNC TERMINAL AND RGB INPUT SELECT
INPUT MENU
Used to select
the Input
source. (Refer
to P26)
INPUT SOURCE MENU
Used to select a
computer signal type
(Digital or Analog).
Refer to P27
Used to set the Display
Menu, other functions
setting and reset Lamp
Replacement Monitor
Timer. (Refer to P39-41)
INPUT SOURCE MENU
Used to select a input source
type. (RGB or Y, Pb/Cb, Pr/Cr)
(Refer to P27)
4
2
RGB
D-XGA
XGA 1
XGA 1