Proxima ASA Proxima PROAV9350 - Manual (Page 39)

39
SETTING
SETTING MENU
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SETTING and press the SELECT button. Another dialog box
SETTING Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to set, and
then press the SELECT button to set it (For example "On" or
"Off").
1
2
Blue back
When this function is “On” this projector will produce a blue image
instead of the video noise on the screen when the input source is
unplugged or turned off.
Display
Set the Pointer to the item
and press the SELECT
button.
Ceiling
When this function is “On” the top / bottom and the left / right
reversed picture is provided to project the image from a ceiling
mounted projector.
Rear
When this function is “On” the left / right reversed picture is provided
to project the image to a rear projection screen.
Ceiling function
Rear function
Split wipe
Turn this function “On” in the SETTING menu. The picture will
change into next one by sliding black image side ways like drawing
the black curtains when the input source is turned into another one.
This function turns the Projection Lamp off when the projector detects signal interruption
and the projector is not used for a certain period in order to reduce power consumption
and maintain the Lamp-life. (This projector is shipped with this function ON.)
Power Management function operates to turn the Projection Lamp off when the input
signal is interrupted and the projector is not operated over 5 minutes. This function
operates as follows;
1. When the signal is interrupted, “No signal” and the counting down (5 minutes)
display appears.
2. When the Projection Lamp turned off, the READY indicator turns off.
3. After 90 seconds, the READY indicator flashes and the Lamp can be turned on
again (Power Management mode).
In this Power Management mode, the Projection Lamp is automatically turned on
when the input signal connected or the projector is operated with any button on the
Side Control or the Remote Control.
Power management
Time left until Lamp off.
This function decides whether to display the On-Screen Displays.
On1 ··· shows all the On-Screen Displays.
On2 ··· shows the On-Screen Displays except the Preparation
Display (Our Logo).
Off ···· sets the On-Screen Displays disappeared except;
● ON SCREEN MENU
● “Power off?” message
● P-TIMER