Palm Handhelds m500 - Manual (Page 184)

Page 174 Advanced HotSync® Operations
To set the HotSync options on a Macintosh:
1. Double-click the HotSync Manager icon in the Palm folder.
2. Click the HotSync Controls tab and select any of the following
options:
HotSync
Enabled/
Disabled Activates the serial port monitor and prepares
your Macintosh to synchronize with your
handheld. By default, the serial port monitor is
enabled whenever you start your Macintosh.
Keep this default if your HotSync cradle is
always connected to a specific port (USB,
serial, or modem). If, however, you use the
same port for other devices besides the
HotSync cradle, disable the serial port monitor
and then enable it manually only when you
connect the cradle to perform a HotSync
operation.
Enable
HotSync
software at
system
startup Activates the serial port monitor automatically
each time you start your computer. If this
option is not checked, you must open HotSync
Manager and select the Enabled option before
you can perform a HotSync operation.
Show more
detail in
HotSync Log Includes more troubleshooting information in
the log that is generated when you perform a
HotSync operation.