Idle timeout, To set the idle timeout – Palm Handhelds m500 User Manual

Page 226

Advertising
background image

Page 216

Setting Preferences for Your Handheld

3. Tap the Connection type pick list and select one of the following

connection types:

Note:

If you are not sure, try PPP; if that doesn’t work, ask your
Internet Service Provider or your System Administrator
for the correct connection type.

Idle timeout

The Idle timeout setting defines how long your handheld waits before
dropping the connection with your ISP or dial-in server when you
switch out of a TCP/IP application.

To set the Idle timeout:

1. Tap the Idle timeout pick list and select one of the following

options:

2. Tap OK.

PPP

Point-to-Point protocol

SLIP

Serial Line Internet Protocol

CSLIP

Compressed Serial Line Internet Protocol

1 minute

Waits one minute for you to open another
application before it drops the connection.

2 minutes

Waits two minutes.

3 minutes

Waits three minutes.

Never

Keeps your PPP or SLIP connection until you
turn off your handheld (or until it times out). This
option works best with the PalmModem
accessory.

Select connection type

Advertising