To change the cradle setting, System, alarm, and game sounds, To set the system and alarm sounds – Palm Handhelds m500 User Manual
Page 215: Alarm vibrate and led settings, To set alarm vibrate and led switches
Chapter 8
Page 205
To change the cradle setting:
■
Tap the Stay on in Cradle check box to leave your handheld on
when it is in the cradle.
System, alarm, and game sounds
Your handheld uses a variety of sounds. The System, Alarm, and
Game Sound settings enable you to turn the sounds on or off, and to
adjust the volume level.
To set the system and alarm sounds:
1. Tap the System Sound pick list and select the sound level.
Note:
When you turn off the System Sounds, you also turn off
the “chime” tones associated with the HotSync operation.
2. Tap the Alarm Sound pick list and select the sound level.
3. Tap the Game Sound pick list and select the sound level.
Note:
The Game Sound setting works only with games that are
programmed to respond to this setting. Older games
typically do not respond to this setting.
Alarm Vibrate and LED settings
You can set alarms in Date Book, Clock, and Note Pad to remind
yourself of important meetings or notes. When you enable the Alarm
Vibrate and LED settings, your handheld vibrates and the LED
indicator blinks to notify you of alarms. This is useful for situations
where you want to turn the Alarm Sound off, but still be notified of
alarms.
To set Alarm Vibrate and LED switches:
1. Tap the Alarm Vibrate pick list and select On or Off.
2. Tap the Alarm LED pick list and select On or Off.