Panasonic AW-E860L - Manual (Page 14)

- 13 (E) -
Mounting
2. Camera mounting
1. To mount a camera on a pan/tilt head or a mounting
bracket or the like, attach the mounting adapter
(supplied) to the bottom of the camera in case of bottom
mounting.
2. Fix the camera mounting base, pan/tilt unit, and tripod
securely in the screw hole (1/4”-20UNC) of the camera or
the mounting adapter.
3. If the camera cannot be securely fixed, mount the camera
on a mounting bracket or the like with the supplied rubber
sheet between the camera and it.
4. To mount the camera on the pan/tilt head, use a driver in
order to fix it securely.
$ Preventing the camera from falling or coming off
O When attaching a camera to the pan/tilt head (AW-PH400,
etc.), follow the directions in the Operating Instructions to fix
the camera firmly in position.
In addition, link the camera to the pan/tilt head using the safety
chain and the mounting screws to help ensure the camera
does not fall.
O When attaching the camera on any mounting or other pan/tilt
head, check that the mounting can safely bear the total weight
of the camera, lens, connection cables, etc., fix the camera
firmly in position using the prescribed tool, and take
appropriate measures to prevent the camera from falling.
When changing the camera mounting adapter, use a
screwdriver or similar tool to tighten the screws firmly.
Mounting adapter
Camera mounting bracket (WV-831)