Panasonic AW-E860L User Manual
Page 47
- 46 (E) -
ENGLISH
8
G/L Adjustment Set Display
Z
Horizontal Phase Adjustment [H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
[
Subcarrier Phase Coarse Adjustment
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
\
Subcarrier Phase Fine Adjustment
[SC Fine: –511 to +511]
Fine adjustment of subcarrier phase can be made when a
genlock signal is supplied.
9
Detail Set Display
]
Detail Level Setting [Detail: OFF, Low, High]
Contour correction quantity can be selected.
Detail settings made using the Horizontal/Vertical Detail
Level High/Low Setting.
^
Horizontal Detail Level High Setting
[H Detail Level H: L+1 to 63]
_
Vertical Detail Level High Setting
[V Detail Level H: L+1 to 31]
`
Horizontal Detail Level Low Setting
[H Detail Level L: 1 to H–1]
a
Vertical Detail Level Low Setting
[V Detail Level L: 1 to H–1]
Detail level can be set in horizontal (H) and vertical (V)
directions with the Detail Level Setting at High or Low.
Whichever the direction, H or V, the set level at High
must be at least one position higher than that at Low.
b
Detail Band Setting [Detail Band: 1 to 5]
A contour correction band can be set with the Detail
Level Setting at High or Low. The higher setting, the finer
will be the detail.