POLAR S810 - Manual (Page 43)

J 83
Polar heart rate monitor is designed to indicate the level of
physiological strain and intensity in sports and exercise. No
other use is intended or implied. Heart rate is displayed as
number of heart beats per minute (bpm).
Polar transmitter
Battery type:
Built-in Lithium Cell
Battery life: Average 2 500 hours of use
Operating temperature: -10 ° C to +50 ° C/ 14 ° F to 122 ° F
Material: Polyurethane
Elastic strap
Buckle material:
Polyurethane
Fabric material: Nylon, polyester and natural rubber
including a small amount of latex
J. TECHNICAL
SPECIFICATIONS
I 82
1. Press the RESET button with a pen tip. Display becomes full of digits.
If you don’t press any button after reset within one minute the wrist
receiver goes to the Time of day display.
2. Press any of the buttons once. The time of day is displayed.
...the battery of the wrist receiver must be replaced?
We recommend having all service done by an authorised Polar Service
Centre. This is especially necessary to ensure the warranty remains valid and
is not affected by incorrect repair procedures done by an unauthorised
agent. Polar Service will test your wrist receiver for water resistance after
battery replacement and make a full periodic check of the complete Polar
heart rate monitor.
...the data transfer from receiver to computer was unsuccessful
1. Check the correct position of the wristwatch receiver with the interface.
2. Check that the surroundings are not too bright. This problem often
occurs near windows.
3. Check that there is no obstruction between the infrared windows of the
interface and the wristwatch receiver.
S810 manual GBR A.pm6 23/4/01, 15:53 82-83