Palm Zire 72 - Manual (Page 303)

Zire™ 72 Handheld 281
CHAPTER 17 Connecting Wirelessly to Other Devices
3
Select the phone you want to connect to:
a. Tap the Manufacturer and Model pick lists, select the correct entries for your
phone, and then select Next.
b. The Connection Setup screen displays all Bluetooth phones within range. If
your Phone did not show up on the discovery results, select Find More to
search again.
(Windows only) If the phone still does not appear, run the Phone Link
Updater application and then go to step 4. Phone Link Updater is installed on
your desktop computer when you install Palm Desktop software from the
CD.
(Mac only) If the phone still does not appear on the list, go to
www.palmone.com/us/support/downloads/phonelink.html to download
the driver for your phone, and then go to step 4.
c. Select the phone you want, select OK, and then select Next again.
Continued
Tip
If you receive a message
that your phone is not
ready to accept a
connection, check to
make sure that your
phone is prepared to
make a Bluetooth
connection. See the
instructions included with
your phone.
Select phone
Select if your phone
does not appear