Panasonic KX-FPG378 - Manual (Page 74)

8. Programmable Features
72
{#}{ 4}{1} Changing the fax activation code
FAX ACTIVATION
MODE=ON [ ±]
If you wish to use a handset (page 51) or an
extension telephone (page 52) to receive faxes,
activate this feature and program the activation
code.
{
1} “ ON” (default)
{ 2} “ OFF”
1. Press {MENU}.
2. Press {#}, then {4}{1}.
3. Press {1} to select “ ON”.
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9,
{*} and {#}.
L The default code is “; #9”.
L Do not enter “0000”.
6. Press {SET}.
7. Press {MENU}.
{#}{ 4}{2} Setting the message alert
MESSAGE ALERT
MODE=OFF [ ±]
To alert you with beeps when a new voice
message is recorded. If you hear slow beeps,
listen to recorded messages. The beeps will
stop.
{
1} “ ON”: You will hear a beeping sound.
{ 2} “ OFF” (default): Deactivates this feature.
{#}{ 4}{3} Setting the recording time alert
REC. TIME ALERT
MODE=OFF [ ±]
To alert you with beeps when there is less than
60 seconds of remaining recording time. If you
hear slow beeps, erase the recorded messages
(page 61, 64). The beeps will stop.
{
1} “ ON”: You will hear a beeping sound.
{ 2} “ OFF” (default): Deactivates this feature.
{#}{ 4}{4} Setting the memory reception
alert
RECEIVE ALERT
MODE=ON [ ±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
{ 1} “ ON” (default): You will hear a beeping
sound.
{
2} “ OFF”: Deactivates this feature.
{#}{ 4}{6} Setting friendly reception
FRIENDLY RCV
MODE=ON [ ±]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
{
1} “ ON” (default): You do not have to press
{ FAX/START} for fax reception.
{ 2} “ OFF”: You have to press {FAX/START} for
fax reception.
{#}{ 4}{7} Setting the fax voice guidance
FAX GUIDANCE
MODE=ON [ ±]
If you wish to hear voice guidance for fax
transmission/reception, activate this feature.
{
1} “ ON” (default): You will hear voice guidance.
{ 2} “ OFF”: Deactivates this feature.
{ 3} “ ERROR”: To hear voice guidance only when
fax transmission/reception fails.
{#}{ 5}{4} Changing the recording time for
your TAM/FAX greeting message
GREETING TIME
MODE=16s [ ±]
{ 1} “ 16s” (default): Maximum recording time is
16 seconds.
{
2} “ 60s”: Maximum recording time is 60
seconds.
See page 59 for details.
{#}{ 5}{9} Copying phone book data from the
base unit to the handset
COPY PHONE BOOK
=1 ITEM [ ±]
{ 1} “ 1 ITEM” (default)
{ 2} “ ALL ITEMS”
See page 38 for details.
{#}{ 6}{0} Setting the message transfer
MESSAGE TRANSFER
MODE=OFF [ ±]
To transfer a recorded incoming message to
another telephone (page 65), activate this
feature and program the transfer telephone
number.
{
1} “ ON”
{ 2} “ OFF” (default)
1. Press {MENU}.
2. Press {#}, then {6}{0}.
FPG379-PFQX2138ZA-en.book Page 72 Wednesday, January 12, 2005 4:49 PM