6 receiving a fax automatically – auto answer on, Receiving a fax automatically – auto answer on, 6 receiving a fax automatically – auto answer on – Panasonic KX-FPG378 User Manual
Page 54: Fax 52
4. Fax
52
How to receive faxes with an extension
telephone
If you have another telephone connected to the
same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
–
document reception is required,
–
a fax calling tone (slow beep) is heard, or
–
no sound is heard,
press {*}{#}{9} (default fax activation
code) firmly.
L
The fax machine will start reception.
3. Replace the handset.
Note:
L
To receive fax documents using the
extension telephone, make sure remote fax
activation is turned ON (feature #41 on page
72) beforehand. The default setting is ON.
4.6 Receiving a fax
automatically – Auto
answer ON
4.6.1 Activating TAM/FAX mode
(Telephone Answering
Machine/Fax mode)
1
Make sure feature #77 is set to “
TAM/FAX”
(page 73) beforehand.
2
Press {AUTO ANSWER} repeatedly to
display the following.
TAM/FAX MODE
2 RINGS
L
The display will show the ring setting in
TAM/FAX mode. If you wish to change it,
press {A} or {B} repeatedly to display
the desired setting, and press {SET}.
L
You can adjust the speaker volume after
changing the ring setting. Press {A} or
{B}
while listening to the greeting
message.
L
The {AUTO ANSWER} indicator turns
ON.
L
The remaining time for recording
messages will be displayed.
Note:
L
The maximum incoming message recording
time can be changed (feature #10 on page
69, or page 77).
{
SET}
{A}{B}
AUTO ANSWER
FPG379-PFQX2138ZA-en.book Page 52 Wednesday, January 12, 2005 4:49 PM