Paradyne COMSPHERE 3615 - Manual (Page 113)

E-1 3615-A2-GB20-20 December 1996
Application Configurations
Overview E-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dial Backup for Received Data Errors Application E-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dial Backup for Exceeded Load Thresholds Application E-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frame Relay and Simultaneous Diagnostic Application E-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
The DualFlow DSU supports Frame Relay and
router-based applications. This appendix shows examples
of typical point-to-point configurations using your
DualFlow DSU. It is intended to aid you in configuring
your network and selecting the appropriate operating
configuration for your application.
To simplify configuring the DSU, pre-defined
configurations for these applications have been provided.
Once an application is loaded into the DSU, you can
change or customize the DSU’s configuration, as needed.
Three separate user-defined storage areas for saving
changed configurations are also provided. See the
Configuration Options (Opts) subbranch of the
Configuration (Confg) branch. Refer to Appendix A to
quickly locate the branch on the DCP. Refer to Chapter 5
for detailed configuration information.
Before connecting the NMS to the circuit, refer to your
6700 or 6800 Series NMS documentation.
E