Setup procedures, Opening the switch pocket, Channel group selection – Panasonic WX-CH2050 User Manual
Page 10
10
SETUP PROCEDURES
Caution: Setup of this product should only be performed
by qualified service personnel or system installers.
● Opening the Switch Pocket
1. Press the power button to turn off the headset.
2. Open the switch pocket adjacent to the ear pad using
the supplied screwdriver.
3. Set the switches as described below.
4. After finishing the setup, turn on the headset.
5. Replace the lid.
● Channel Group Selection
You can select a channel group by setting the rotary switch
inside the pocket.
Note: When a switch position other than 1 through 8 is
selected, the power indicator will blink in red.
1. Press the power button to turn off the headset.
2. Set the switch to the channel group.
Available Channel Group: 1 - 8
SERVICE
USE ONLY
1
2
3
4
5
6
7
8
SERVICE
USE ONLY
GROUP
FUNC
TION
OFF
ON
1 2
3
4
5
6
7
8
SERVICE
USE ONLY
GROUP
FUNC
TION
OFF
ON
1 2 3 4 5 6 7 8
OFF
ON
1 2
3
4
5
6
7
8