Panasonic WX-CH2050 - Manual (Page 13)

13
1. Press the power button to turn off the headset.
2. While holding down the talk [T] and page [P] buttons
simultaneously, press the power button to turn on the
headset.
The headset enters the setup mode where the indica-
tors and buttons have different functions than in normal
operation.
3. Select a default channel setup from four options, press-
ing the [T] button.
4. Press the [A/B] button to move to the talk setup and
page setup.
5. Select a talk mode, pressing the [T] button.
6. Select a page mode, pressing the [P] button.
7. Press the [A/B] button to confirm that the indicators
show the three modes selected for the default channel,
talk and page.
8. Press the power button to turn off the headset, then turn
it on again. The newly selected operation mode will be
applied to the headset.