Panasonic WX-CH2050 - Manual (Page 6)

6
OPERATING PROCEDURES
Notes:
• Transmission using the talk [T] or page [P] button is
allowed for a single headset at a time. A continuous
beep or distorted sound will be heard in a headset that
tries to transmit while another person is operating.
• Maintain a distance of more than 0.3 m (1 ft) between
the headset and the order taker, or more than 1 m (3 ft)
between the headset and the center module.
● Preparations
Prior to operating the headset, confirm that the system
setup for the headset, center module, and other devices
has been completed.
1. Hook the tabs of the strap to the two strap buttons on
the headset. There are two strap buttons on the head-
set: one is at the lower part of the head pad, and the
other is behind the ear cushion.
2. Install a battery in the battery compartment, referring to
BATTERY LOADING & REPLACEMENT.
3. Wear the headset, and route the strap behind your
neck.
4. Adjust the head pad so that the earphone is placed on
your ear.
5. Rotate and bend the microphone boom so that the
microphone is placed near your mouth.
6. Press the power button to turn on the headset.
A/B
VOL.
A/B
VOL.
q
e
w
A/B
VOL.