Panasonic WX-CH2050 - Manual (Page 7)

7
● Communications with Customers
[TALK]
Any store personnel wearing the headset can communicate
bidirectionally with any customer who is at the menu board.
1. Select a proper sound level by pressing the [ ▲] or [▼]
button.
2. You will hear a tone in the headset when a vehicle
arrives at the menu board.
Note: The tone duration varies depending on the set-
tings made in the center module.
<When the talk-lock mode is preset>
1. Press the talk [T] button and speak to the customer.
A short beep repeats in the headset.
2. Press the button again to release the lock and listen to
the customer.
<When the press-to-talk mode is preset>
1. Hold down the talk [T] button and speak to the cus-
tomer.
A short beep repeats in the headset.
2. Release the button and listen to the customer.
● Communications with Other Store
Personnel [PAGE]
Store personnel wearing the headset can communicate
with each other without being heard by customers.
<When the page-lock mode is preset>
1. Press the page [P] button and speak into the micro-
phone at a normal level.
A short beep repeats in the headset to notify all store
personnel that the system operates in the page mode.
2. Press the page [P] button again to release the lock and
listen to the response from other store personnel.
<When the press-to-talk mode is preset>
1. Hold down the page [P] button and speak into the
microphone at a normal level.
A short beep repeats in the headset to notify all store
personnel that the system operates in the page mode.
2. Release the button and listen to the response from
other store personnel.
VOL
Press
Press again
Hold down
Release
Press
Press again
Hold down
Release