Inserting/removing the battery – Panasonic DMC-FX8GN User Manual

Page 14

Advertising
background image

Preparation

14

VQT0R57

Inserting/Removing the Battery

• Check that the camera is turned off and

that the lens is retracted.

1 Slide the release lever to the

direction of arrow, and open the
card/battery door.

• Please be sure to use genuine

Panasonic batteries (CGA-S005E).

2 Insert:

Insert the charged battery fully
paying attention to the direction
of the battery.

Remove:
Slide the lock

A to remove the

battery.

3 1 Close the card/battery door.

2 Slide the release lever to the

direction of arrow.

• If you will not be using the camera for a

long time, remove the battery. Store the
removed battery in the battery carrying
case (supplied). (P95)

• When a fully charged battery has been

inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing time may be
shorter if the battery is not charged
sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again. (P18)

• Do not remove the card and the battery

while the card is being accessed. The
data on the card may be damaged.
(P16)

• Do not remove the battery with the

camera turned on since the settings on
the camera may not be stored properly.

• The supplied battery is designed only

for the camera. Do not use it with any
other equipment.

OPEN LOCK

OPEN LOCK

OPEN LOCK

VQT0R57ENG.book 14 ページ 2005年5月24日 火曜日 午前8時20分

Advertising