Panasonic DMC-FX8GN - Manual (Page 43)

Recording pictures (basic)
43
VQT0R57
Taking Pictures using Burst Mode
1 Press the single or burst mode
button to switch the burst mode
setting and then take pictures.
: High speed
;
: Low speed
;
: Unlimited
¢
;
No display: cancelled
¢Depending on the memory size,
battery power, picture size and quality
(compression)
• Hold down the shutter button fully to
activate the burst mode.
∫ Number of pictures recorded in burst
mode
¢When the shutter speed is faster than
1/60 and the flash is not activated
• The burst speed is constant regardless of
the transfer speed of the card.
• When the burst mode setting is set to
Unlimited
– You can take pictures until the capacity
of the card becomes full.
– The speed of taking pictures becomes
slow during a recording.
• The focus is fixed at taking the first
picture.
• In simple mode [ ], the burst speed is
fixed to Low.
• When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
• When the burst mode is activated, [AUDIO
REC.] cannot be used.
• If the flash is activated, you can record
only 1 picture.
• When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
3
Burst speed
(pictures/
second) ¢
Number of recordable
pictures (pictures)
3 max. 3 max. 5
2 max. 3 max. 5
approx. 1.5
Depends on remaining
capacity of the card
VQT0R57ENG.book 43 ページ ２００５年５月２４日 火曜日 午前８時２０分