Panasonic DMC-FX8GN - Manual (Page 84)

Connecting to a PC or Printer
84
VQT0R57
Connecting to a PC or Printer
Before Connecting to the PC or the Printer
[ : USB MODE]
Select the USB communication system
before connecting the camera to your PC or
your printer with the USB connection cable
(supplied).
Set the items on [USB MODE] in the
[SETUP] menu. (P19)
1 Select [USB MODE].
2 Select [PC] or [PictBridge (PTP)].
• If you connect the camera to a PC,
select [PC]. (P85)
• If you connect the camera to a printer
supporting PictBridge, select
[PictBridge (PTP)]. (P87)
• When [PC] is selected, the camera is
connected via USB Mass Storage
communication system.
• When [PictBridge (PTP)] is selected, the
camera is connected via PTP (Picture
Transfer Protocol) communication system.
SETUP 2 /
3
CLOCK SET
VOLUME
NO.RESET
SELECT EXIT MENU
PC
LEVEL 3
RESET
MENU
USB MODE
USB MODE
SELECT SET
PictBridge
(PTP)
PC
MENU
VQT0R57ENG.book 84 ページ ２００５年５月２４日 火曜日 午前８時２０分