Inserting/removing the card – Panasonic DMC-FX8GN User Manual

Page 15

Advertising
background image

Preparation

15

VQT0R57

Inserting/Removing the Card

• Check that the camera is turned off and

that the lens is retracted.

1 Slide the release lever to the

direction of arrow, and open the
card/battery door.

• The card and the data may be

damaged if it is inserted or removed
while the camera is turned on.

• We recommend using Panasonic’s

SD Memory Card. (Use only the
genuine SD card with SD Logo.)

2 Insert:

Insert the card fully with the label
side facing the front of the
camera until it clicks.

Remove:
Push the card until it clicks, then
pull the card out upright.

• Check the direction of the card.
• Do not touch the connection terminals

on the back side of the card.

• The card may be damaged if it is not

fully inserted.

3 1 Close the card/battery door.

2 Slide the release lever to the

direction of arrow.

• If the card/battery door cannot be

completely closed, remove the card and
insert it again.

OPEN LOCK

OPEN LOCK

VQT0R57ENG.book 15 ページ 2005年5月24日 火曜日 午前8時20分

Advertising