Pioneer CNDV-20 - Manual (Page 105)

103
Chapter
5
Customizing
Y
our Na
vigation System
■Hardware menu
Hardware Volume
The volume of voice guidance played by your Navigation System can be set. To change the
volume, select “+” or “-” with the joystick and click the OK button.
Monitor Type
The scanning type can be set according to the type of a display used. If the screen of the dis-
play you are using is blurred, change this setting to the one that gives the clearer display.
➲
You can set this either On or Off if the Pioneer AV Receiver is connected to this unit using a
26 pin RGB cable.
■Others menu
Demo Mode
This is a demonstration function for shops. After a route is set, the simulation of the route
guidance to a destination is automatically displayed. Normally, set this to “Off”.
Voice Recognition Mute
This can be set when your Navigation System is combined with the Pioneer AV Head Unit
with a muting function (one that has an Yellow/black lead). This setting controls whether the
volume of the AV Head Unit is automatically muted during voice operation.
➲
If you select “Off”, the sound from the Head Unit may interfere with the voice recognition
system.
Voice Guidance Mute
This can be set when your Navigation System is combined with the Pioneer AV Head Unit
with a muting function (one that has an Yellow/black lead). This setting controls whether the
volume of the AV Head Unit is automatically muted during voice guidance.
Auto Voice Recognition
This setting enables to perform all operations from entering password up to route calculation
with voice by switching to voice recognition state after the engine of your car is started. (This
function is effective only when a route is not set.)
Type A* : Non-interlaced type. (When using Pioneer’s display, choose this setting.)
Type B :
Interlaced type.
On (Repeat) : Demo Mode is set on.
Off* :
Demo Mode is set off.
On* : During voice operation, the volume of the AV Head Unit is muted automatically.
Off :
The volume of AV Head Unit stays the same during voice operation.
On* : During voice guidance, the volume of AV Head Unit is muted automatically,
Off :
Volume of AV Head Unit stays the same during voice guidance.
On : The automatic voice recognition is engaged each time the car is started.
Off* : Voice operation starts after pressing the TALK button.