Pioneer CNDV-20 - Manual (Page 30)

28
The time difference between the time originally set in this unit (Pacific Standard Time)
and the current location of your car is shown. If necessary, adjust the time difference.
Move the joystick to select “Hour +” or “Hour -” and click the OK button to change the
time difference by one hour. Set the time difference between the current location of your
car and the Pacific Standard Time.
8 If necessary, set to summer time.
Daylight Saving Time (DST) is off by default. “Off” is shown on the right-hand side of
“Daylight Saving Time”.
If DST is in effect, move the joystick to select “Off” and click the OK button. When the
list of selectable options (“On” and “Off”) appears, move the joystick to select “On” and
click the OK button. The DST setting is then turned On.
9 Select “Done” and click the OK button.
The map of your surroundings appears.
This completes the setup of your Navigation System. Chapter 1 explains the basic operation
of your Navigation System.
➲
To change the language and time later, see Chapter 5 “Customizing Your Navigation Sys-
tem”.