Pioneer CNDV-20 - Manual (Page 117)

115
Chapter
6
Combining and Using Pioneer A
V
Equipment
■Displaying information screen
1 The operation mode switch is set to “NAVI”.
2 Press the DISP button and switch the screen display.
If you press the DISP button while using the navigation display the information plate for
source appears at the bottom of the screen. If you repeat this operation this display will
appear and disappear. If you do not operate for 4 seconds, information plate automatically
disappears.
If you press the DISP button in the screen of each source, you can switch the items dis-
played on the screen. As you press the DISP button, displayed items are switched over.
➲
The number of switching over varies according to the source selected.
➲
All the characters may not be indicated according to the length of the characters. In
such a case, “...” appears at the end of the characters showing that all the characters
are not displayed.
■Flow of menu operation at each source
1 Press the SOURCE button and switch to the source you want to operate.