Warnings and safety rules, Location parts description – Port-A-Cool KA55 User Manual

Page 6

Advertising

manufactured by port-a-cool, llc

Port-A-Cool Mexico, S. de R.L. de C.V.

•

Paseo de la Reforma #404 piso 4

•

Col. Juárez

México DF 0660

•

www.KuulAire.com

Port-A-Cool, LLC

•

709 Southview Circle

•

Center, TX 75935

•

www.KuulAire.com

Symptom

Possible Cause

Possible Solution

No discharge of air

Cord is not plugged in

Make sure cord is plugged in and try to turn the unit on pressing buttons

Power is not on

on control panel and remote control. Check the circuit breaker or check

Circuit breaker/gFCI

gFCI reset button.

Water tank is not locked properly

Make sure the water tank is assembled and locked properly.

Not cooling

Pump is not turned on

Check the water level and turn on the pump by pressing COOL button.

Low/No water

Make sure COOL button/Low Water icon are not flashing (low/no water) -

refill the tank

Damaged pump

Replace pump

Odor emission

Brand new unit

Brand new cooling pad will initially have an odor which will dissipate within a

Old unit with algae

week of initial use. If the unit is not new, there may be an algae issue

– replace the pad and maintain regularly.

Water droplets coming

Calcium saturated water

Drain water, deep clean and clean the cooling pad.

out of air outlet

Clogged cooling pad

Cooling pad may need to be replaced.

The unit will not respond Damaged PCB

Try with remote control. If the unit responds, PCB board fasteners loose.

Moisture in PCB

If neither control panel nor remote control command works, PCB board

Remote control batteries

damaged – replace PCB.

Try using remote control to see if the unit responds. If the unit responds

briefly, likely cause is the moisture in the PCB. Turn off unit by unplugging

it from the power. Drain, clean and dry the unit, possibly replace the cooling

pad. Refill it with fresh water.

Check batteries.

Unit is making noise

Calcium build up in blower

Deep clean the unit -remove calcium debris.

WARNINGS AND SAFETY RULES

▲

LOCATION

PARTS DESCRIPTION

�

ELECTRICAL

ASSEMBLY INSTRUCTIONS

WARRANTY

CLEANING AND MAINTENANCE

NOTES

TROUBLESHOOTING

REMOTE CONTROL

USE AND OPERATION

▲

Model No.

KA55

Voltage

120VAC

Frequency

60Hz

Current

2.4 A

Water Tank Capacity 8 gallons

Dimensions

H 34” x W 18” x D 14”

Shipping Weight

30 lbs.

Motor

Class A, Themally Protected