Pioneer Elite PureVision PRO 1110HD - Manual (Page 114)

2
En
I N
SERVICE ONLY
MONITOR OUT
DIGITAL OUT
OPTICAL
INPUT 1
COMPONENT VIDEO
S400
DTV-ANTENNA
IN
INPUT 3
INPUT 1 INPUT 3
VCR
CONTROL
A ANTENNA/CABLE B
OUT
I N
I N
OUT
CONTROL
OUT
S-VIDEO
S-VIDEO S-VIDEO R-AUDIO-L R-AUDIO-L Y HDMI
AC INLET
BLACK
WHITE
SYSTEM CABLE
R-AUDIO-L R-AUDIO-L Y
CB/PB
CB/PB
CR/PR
CR/PR
VIDEO
VIDEO VIDEO
INPUT 2
(TS)
HDMI equipment
Media Receiver (rear view)
Audio cable (commercially available)
Make this connection when inputting
analog audio signals.
HDMI cable
(commercially available)
Connecting HDMI equipment
For the handling procedures and the other functions, refer to the dedicated
operation manual.
Input signal correlation table
1920
∗
[email protected]/60Hz
720
∗
[email protected]/60Hz
1280
∗
[email protected]/60Hz
720(1440)
∗
[email protected]/60Hz
• PC signals are out of correspondence.
Using HDMI Input
The INPUT 1 and INPUT 3 terminals include HDMI
terminals to which digital video and audio signals can
be input. To use the HDMI terminal, activate the termi-
nal and specify the types of video and audio signals to
be received from the connected equipment. For the
types of these signals, see the operation manual that
came with the connected equipment.
Before starting the menu, press INPUT 1 (or INPUT
3) on the remote control unit or press INPUT on the
Plasma Display to select INPUT 1 (or INPUT 3).
To activate the HDMI terminal:
1 Press HOME MENU.
2 Press / to select “Option”, and then press
ENTER.
3 Press / to select “HDMI Input”, and then press
ENTER.
4 Press / to select “Setting”, and then press
ENTER.
5 Press / to select “Enable”, and then press
ENTER.
Setting
Disable
Enable
Item Description
Disable Deactivates the HDMI terminal.
(factory default)
Enable Activates the HDMI terminal.
6 Press HOME MENU to exit the menu.
PDP5040HD-UC (HDMI) 8/22/03, 10:48 2