Pioneer Elite PureVision PRO 1110HD - Manual (Page 41)

09 Basic Adjustment Settings
41
En
Setting up conventional TV channels
This section describes how to search and set up
conventional TV channels that you can watch under the
current conditions. Unless you set up conventional TV
channels using Auto channel Preset, you may not be
able to tune in those channels.
• Conventional TV channels in this manual designate
TV channels that are received through the conven-
tional VHF/ UHF frequencies or conventional cable TV
channels.
Using Auto Channel Preset
Auto Channel Preset automatically searches and sets
up conventional TV channels.
1 Press HOME MENU.
2 Press / to select “Setup”, and then press
ENTER.
3 Press / to select “Channel Setup”, and then
press ENTER.
4 Press / to select “Auto Channel Preset”, and
then press ENTER.
5 Press / to select “Antenna”, and then
press
/ to select “A” or “B”.
Auto Channel Preset
Air/Cable
Preset
Antenna
Start
Air
A
6 Press / to select “Air/Cable”, and then
press
/ to select “Air” or “Cable”.
Auto Channel Preset
Air/Cable
Preset
Antenna
Start
A
Air
7 Press / to select “Preset:Start”, and then press
ENTER.
Auto Channel Preset
Air/Cable
Preset
Antenna
Start
Air
A
• Channel search automatically starts.
Please wait.
Auto channel preset searching.
To cancel auto channel preset,
press [RETURN].
PLASMA DISPLAY
• To quit Auto Channel Preset halfway, press
RETURN.
8 After Auto Channel Preset has been finished,
press HOME MENU to exit the menu.
• When using the Cable Converter, you may need to
manually add Cable Converter output channels.
PDP-ELITE-Eng (40-56) 9/9/03, 11:45 41