Pioneer Elite PureVision PRO 1110HD - Manual (Page 83)

12 Useful Adjustment Settings
83
En
AV mode
PC mode except for XGA signals
PC mode for XGA signals
Selecting a screen size
Press SCREEN SIZE to switch among the screen size
options selectable for the type of video signals currently
received.
• Each time you press SCREEN SIZE, the selection is
switched.
• The selectable screen sizes differ depending on the
types of input signals.
AV mode
Item Description
4:3 For 4:3 “standard” pictures. A side bar appears on
each side.
FULL For 16:9 squeeze pictures.
ZOOM For 16:9 letterbox pictures. Bars may appear on
the top and bottom with some programs.
CINEMA For 14:9 letterbox pictures. Bars may appear on
the top and bottom on some programs.
WIDE In this mode pictures are progressively stretched
toward each side of the screen.
PC mode except for XGA signals
Item Description
4:3 Fills the screen without altering the input signal
aspect ratio.
FULL Full 16:9 screen display
Dot by Dot Matches input signal with same number of screen
pixels.
PC mode for XGA signals
(Ex. 1024 × 768 input at PRO-1110HD)
Item Description
4:3 Matches input signal with the same number of
screen pixels.
Optimized for 1024
× 768 display
FULL1 Full 16:9 screen display
Optimized for 1024
× 768 display
FULL2 For wide signal display
Use when displaying 1280
× 768 signal resolution.
• The PC mode above is for the PRO-1110HD. For the
PRO-910HD the number of panel pixels is different,
so signal processing and actual viewing conditions
will vary slightly.
ZOOM
4:3
WIDE FULL
CINEMA
4:3
Dot by
Dot
FULL
4:3
FULL2 FULL1
PDP-ELITE-Eng (81-96) 9/9/03, 11:47 83